Search

DL-DVI-Vision-IP-AR-CON
DL-DVI-Vision-IP-AR-CON

DL-DVI-Vision-IP-AR-CON

Product ID: A1120334

Brand: G&D

KVM-over-IP extender DL-DVI-Vision-IP 

  • outputs dual-link DVI signals via standard IP-based layer 3 networks. The system processes dual-link DVI image data pixel-perfectly and with very good hand-eye coordination.
  • DL-DVI-Vision-IP is a console module (receiver), which is compatible with computer modules (transmitters) for KVM-over-IPTM. Combining DL-DVI-Vision-IP with an IP computer module lets users operate their computers over large distances.

Video

  • bluedec™ – advanced developed compression algorhythm of the latest generation for best video quality and latency-free transmission
  • E-EDID support
  • Resolution up to
  • 2560 × 1600 @ 60 Hz (WQXGA/60Hz),
  • 4096 × 2160 @ 30 Hz (4K2K/30Hz) 

Signals

  • Encrypted video, keyboard, mouse and control data (AES-128) 
  • Full keyboard/mouse emulation
  • Transparent audio signals (stereo, analog)
  • Transparent RS232 (max. 115,200 bps)
  • GenericUSB support for USB classes HID (Human Interface Device) and mass storage 
  • The product allows the simultaneous use of up to three GenericUSB devices via a console module. For this, both the used console module and the used computer module must support the use of up to three GenericUSB devices.

Transmission

  • Via CAT-x cable and over IP-based networks (layer 3)
  • KVM-over-IP™

Device

  • Ident LED for quick location of the device in complex installations
  • Internal power pack for main power supply

System update

  • Updating via Config Panel 21 (HTML5, Java-free, optimized operation)

Security features

  • Screen-Freeze: If the console module loses the video signal due to a broken connection or a problem with the computer's graphics card, the Screen-Freeze function "freezes" the last displayed image of the monitor. This state is highlighted by a red semi-transparent frame. The function is automatically cancelled when an active video signal exists again.
  • secure and trouble-free operation through pairing and encryption with be AES-128 (cannot be manipulated)
  • additional, independent management interface
  • With the Monitoring function, you can auto-output device status messages to Syslog servers or SNMP. The web interface lets you monitor the device manually.

Operation features

  • Due to predefined IP addresses, plug & play is supported for the modules. Therefore it couldn’t be easier to use existing network infrastructures to put the modules into operation in a 1:1 connection.
  • support of Quality of Service (QoS), can be configured by users
  • users can configure network ports of the respective communication channels
  • manual bandwidth management to adjust the required bandwidth

Our Categories

View More